 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Transistor 2SA0719, 2SA0720 (2SA719, 2SA720) Silicon PNP epitaxial planar type Unit: mm For low-frequency power amplification and driver amplification Complementary to 2SC1317 and 2SC1318 s Features 0.70.1 5.00.2 4.00.2 0.70.2 12.90.5 * Complementary pair with 2SC1317 and 2SC1318. s Absolute Maximum Ratings Ta = 25C Parameter Collector to base voltage Collector to emitter voltage 2SA0719 2SA0720 2SA0719 2SA0720 VEBO ICP IC PC Tj Tstg VCEO Symbol VCBO Rating -30 -60 -25 -50 -5 -1 -500 625 150 -55 to +150 V A mA mW C C V Unit V 0.45+0.15 -0.1 2.5+0.6 -0.2 1 23 2.30.2 5.10.2 0.45+0.15 -0.1 2.5+0.6 -0.2 Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature 1: Emitter 2: Collector 3: Base EIAJ: SC-43A TO-92-B1 Package s Electrical Characteristics Ta = 25C Parameter Collector cutoff current Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio 2SA0719 2SA0720 2SA0719 2SA0720 VEBO hFE1 * Symbol ICBO VCBO VCEO Conditions VCB = -20 V, IE = 0 IC = -10 A, IE = 0 IC = -10 mA, IB = 0 IE = -10 A, IC = 0 VCE = -10 V, IC = -150 mA VCE = -10 V, IC = -500 mA IC = -300 mA, IB = -30 mA IC = -300 mA, IB = -30 mA VCB = -10 V, IE = 50 mA, f = 200 MHz VCB = -10 V, IE = 0, f = 1 MHz Min -30 -60 -25 -50 -5 85 40 Typ Max - 0.1 Unit A V V V 340 - 0.35 -1.1 200 6 15 - 0.6 -1.5 hFE2 Collector to emitter saturation voltage Base to emitter saturation voltage Transition frequency Collector output capacitance Note) *: hFE1 Rank classification Rank hFE1 Q 85 to 170 R 120 to 240 VCE(sat) VBE(sat) fT Cob V V MHz pF S 170 to 340 Note) The part numbers in the parenthesis show conventional part number. Publication date: March 2002 SJC00002BED 1 2SA0719, 2SA0720 PC Ta 800 IC VCE -1 200 Ta = 25C -800 -700 IC IB VCE = -10 V Ta = 25C Collector power dissipation PC (mW) 700 600 500 400 300 200 100 0 -1 000 Collector current IC (mA) -800 IB = -1.0 mA - 0.9 mA - 0.8 mA - 0.7 mA - 0.6 mA - 0.5 mA - 0.4 mA - 0.3 mA - 0.2 mA - 0.1 mA -600 -400 -200 Collector current IC (mA) -600 -500 -400 -300 -200 -100 0 -2 -4 -6 -8 -10 0 20 40 60 80 100 120 140 160 0 0 -2 -4 -6 -8 -10 -12 0 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Base current IB (mA) VCE(sat) IC Collector to emitter saturation voltage VCE(sat) (V) -10 -3 -1 Ta = 75C 25C -25C VBE(sat) IC Base to emitter saturation voltage VBE(sat) (V) -100 -30 -10 -3 -1 Ta = -25C 75C IC / IB = 10 600 hFE IC VCE = -10 V IC / IB = 10 Forward current transfer ratio hFE 500 - 0.3 - 0.1 - 0.03 - 0.01 400 25C 300 Ta = 75C 200 25C -25C - 0.3 - 0.1 - 0.03 - 0.01 -1 -3 -10 -30 -100 -300 -1000 - 0.003 - 0.001 -1 -3 -10 -30 -100 -300 -1 000 100 0 - 0.01 - 0.03 - 0.1 - 0.3 -1 -3 -10 Collector current IC (mA) Collector current IC (mA) Collector current IC (A) fT I E 240 50 Cob VCB Collector output capacitance Cob (pF) VCER RBE Collector to emitter voltage VCER (V) IE = 0 f = 1 MHz Ta = 25C -120 IC = -2 mA Ta = 25C VCB = -10 V Ta = 25C Transition frequency fT (MHz) 200 40 -100 160 -80 30 120 -60 2SA0720 -40 2SA0719 -20 20 80 40 10 0 1 3 10 30 100 0 -1 -3 -10 -30 -100 0 1 3 10 30 100 300 1 000 Emitter current IE (mA) Collector to base voltage VCB (V) Base to emitter resistance RBE (k) 2 SJC00002BED 2SA0719, 2SA0720 ICEO Ta 104 VCE = -10 V Area of safe operation (ASO) -10 -3 Single pulse Ta = 25C ICP IC t=1s 103 Collector current IC (mA) -1 - 0.3 - 0.1 t = 10 ms ICEO (Ta) ICEO (Ta = 25C) 102 - 0.03 - 0.01 10 - 0.003 1 0 40 80 120 160 200 - 0.001 - 0.1 - 0.3 -1 -3 -10 -30 -100 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) SJC00002BED 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 2SA719
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |